Sharp Actius PC-MP30 Operation Manual page 150

Sharp actius pc-mp30: operation manual
Table of Contents

Advertisement

Why can't I use a hardware device?
Make sure the hardware device is not crossed out with an X mark using the
following procedure.
1.
Click start – Control Panel. Click Performance and Maintenance; then, System.
If the Classic view is selected, double-click the System icon.
2.
Click the Hardware tab; then, Device Manager.
3.
Double-click the device you cannot use and confirm Use this device (enable)
appears in Device usage.
Why can't I produce sound?
Click or double-click the speaker symbol on the taskbar and check the Windows
volume.
Why can't I turn off my computer?
Follow the instructions on Why doesn't the keyboard or the touchpad function?
Why my computer is so hot?
When charging the battery pack, its surrounding area or the front of the keyboard
may become hot, but this is not a problem.
Why can't find the drivers and applications?
You may accidentally remove them. Refer to the following to retrieve them.
The drivers are stored on the fourth recovery disc if you have created the
recovery CDs and in the DRIVERS folder on your computer. To open the folder;
1. Click start – My Computer.
2. Double-click SHP_V2600U(C:) – Program Files – SHARP – DRIVERS.
The applications are stored on the fifth recovery disc if you have created the
recovery CDs. Without the recovery CDs, you need to reinstall the operating
system from the hard disk.
If you are not sure how to install them, consult local service staff.
T-17

Advertisement

Table of Contents
loading

Table of Contents