Table of Contents
Advertisement
•
In the mobile mode, an irregular motion or frame dropouts may be produced on the
animation. Switch to the normal mode.
•
During playback on INSTANT PLAY, you may experience a picture with an
irregular motion, or frame drops.
Why isn't the optical drive recognized?
•
If your computer is turned on with a DVD disc inserted in the drive, the drive may
not be recognized. In this case, turn off your computer and open the disc tray by the
way on Why does not the drive open? on the previous page. Remove the disc from
the drive; then turn on your computer again.
Trouble with Communication
Why can't I communicate through the built-in modem?
•
Confirm the telephone line is properly connected to the modem jack.
•
Confirm the dial setting (pulse or tone) of Windows XP and/or communication
software is matched with the telephone line.
•
If you set your connection status using New Connection Wizard, check Use dialing
rules in the Properties dialog box of that connection status. (Refer to Internet
Connection section of Chapter 4.)
•
Confirm the country/region setting is appropriate.
•
Confirm the network configuration is appropriate.
•
Confirm the user name or password is correct.
•
Confirm the COM port in the communication software is set appropriately.
•
Turn off the power management in Windows.
•
If an unusual device is attached to the line you are connecting to, the modem may
not function properly. Remove the device or contact the dealer of the device.
•
If your computer is connected to a PBX, consult the PBX maintenance staff or its
service company. If the electric characteristics of your PBX are different from
those of a regular analog line, the modem will not function properly. If you connect
the modem to a digital PBX, both the modem and the PBX may be damaged.
T-8
Advertisement
Table of Contents
