Table of Contents
Advertisement
• The key index options of the computer are 1 through 4.
• Some access points and computers have the options 0 through 3. Refer
to the table below for matching.
Access Point1
/Computer1
(ex. When your access point type is "Access Point 2" and its key index
is set to 0, set 1 to the key index of your computer.)
9.
Click OK twice and close the Wireless Network Connection Properties dialog
box.
WPA-PSK with TKIP or AES
1.
Follow the steps 1 to 4 in the WEP section above.
2.
Select WPA-PSK in the Network Authentication pull-down menu and TKIP or
AES in the Data encryption pull-down menu.
3.
Type the same network key as the other device to be communicated with in the
Network key and Confirm network key fields.
Available letters and digits are following;
ASCII format
Hexadecimal format
*1
0 to 9, a to z, and A to Z (The uppercase and lowercase letters are
distinguished.)
*2
0 to 9, a to f, and A to F (The uppercase and lowercase letters are
not distinguished.)
4.
Click OK twice and close the Wireless Network Connection Properties dialog
box.
Key index matching table
Access Point
/Computer2
1
0
2
1
3
2
4
3
*1
8 through 63 characters
*2
64 digits
2
Your computer
1
2
3
4
4
4-21
Advertisement
Table of Contents
