Table of Contents
Advertisement
Via Hard Disk
With this way, recovery will come from data already installed on the computer rather
than from external media such as CD.
Note that if there is any chance of the data loss or corruption, you cannot
format the hard disk drive(s) and reinstall Windows.
1.
Make sure the computer is turned off.
2.
If any peripheral devices are connected to the computer, disconnect them.
3.
Connect the AC adapter.
Be sure to connect the AC adapter. If the battery power becomes
significantly low, the installation process will be canceled.
4.
Turn on the computer. When the message Press F2 for System Utilities appears
on the bottom left of the screen, press F2. Then, the Setup Utility will open.
5.
In the Exit menu, select Load Setup Defaults; then, press Enter twice.
6.
In the Exit menu, confirm Exit Saving Changes is highlighted and press Enter
twice.
7.
The system will restart. When the message Press F10 to Recover appears on the
upper left of the screen, press F10.
The message stays there for two seconds.
8.
Read the message on the screen, and select the way to recover your system; then,
press Enter.
When you select Recovers both C: and D: drive, reinstall the INSTANT
PLAY after completing the recovering process.
9.
Read the message and select Continue; then, press Enter. The formatting and re-
installation will start.
A-17
Advertisement
Table of Contents
