Sharp Actius PC-MP30 Operation Manual page 55

Sharp actius pc-mp30: operation manual
Table of Contents

Advertisement

Discharging in the mobile mode will take longer to be completed.
6.
Press and hold the Fn key and then, press the F7 (
maximize the LCD screen brightness and then, leave the computer powered on
to discharge the battery pack until the system automatically shut down.
7.
Connect the computer to AC power and let the battery fully charged again.
• Do not turn on the computer until the battery indicator turns to green
and the battery is fully charged.
• Do not connect the computer to AC power while discharging the
battery. The conditioning will be cancelled.
Repeated charging and discharging or long-term storage of the battery
pack cause battery deterioration. In this case, replace the battery pack
with a new one.
Changing Battery Pack
The capacity of a battery pack gradually decreases when used repeatedly (the
deterioration rate depends on the operating environment). If the battery life becomes
extremely short even after the conditioning, you should buy a new battery pack.
Consult your local dealer for a new battery pack.
When you replace the battery pack with a new one:
1.
Turn off the computer and disconnect the AC adapter from the computer.
2.
Close the display cover and turn over the computer on a flat place.
3.
Slide the battery stopper to the unlocked position ( ).
Battery Stopper
) key several times to
2-5
2

Advertisement

Table of Contents
loading

Table of Contents