Table of Contents
Advertisement
1.
Press F2 key while the message Press <F1> to resume, <F2> to setup is
appearing.
2.
In the Exit menu, select Load Setup Defaults and press the Enter key to retrieve
the default value.
3.
Confirm Yes is highlighted and then, press the Enter key.
4.
Set the desired values in the Setup Utility or just leave the default value.
5.
In the Exit menu, select Exit Saving Changes and then, press the Enter key.
6.
Confirm Yes is highlighted and then, press the Enter key.
7.
On Windows, click start – Control Panel.
8.
Click Date, Time, Language, and Regional Options.
9.
Click Change the date and time.
10. In the Date and Time Properties dialog box, set the current date and time; then,
click OK.
11. Close the dialog box.
12. Make an appropriate setting on the Setup Utility, if necessary. If you want to
keep the default settings, no setting is needed.
Trouble with Display
See also the Adjusting Display section in Chapter 1 and the External Display section
in Chapter 3.
Why is the screen blank?
•
Press any key to see if any power management feature has turned off the screen to
save power.
•
See the power indicator to check whether your computer is turned on.
•
If you are using a battery pack, make sure it is correctly installed and has a charge
remaining.
•
Make sure the LCD screen is selected as the display by pressing Fn+F5 ( ).
•
Check whether the display is on by pressing Fn+F11 ( ).
•
If you still have the problem after trying the above, follow the steps in Why doesn't
the keyboard or the touchpad function?
T-3
Advertisement
Table of Contents
