Table of Contents
Advertisement
Removing Disc
1.
Make sure the optical drive indicator is not lit and press the eject button. The
optical drive tray will pop out.
Make sure the optical drive indicator is not lit before pressing the eject
button (except during INSTANT PLAY running).
2.
Gently pull out the tray.
3.
Steady one edge point and lift the opposite edge of the disc, then, remove the
disc from the tray.
4.
Gently push the tray back into the computer.
Writing Data to Disc
• Before writing to discs, follow the instructions below:
• Connect the AC adapter. If the battery is discharged, the writing
process will stop and fail.
• Disable the power management. See the Power Saving section of
Chapter 2.
• Close all unnecessary and automatic start-up applications.
• Disable the screen saver. (Refer to the Changing Wallpaper and
Setting Screen Saver section later in this chapter.)
• Some discs restrict the writing or rewriting speed to ensure recording
quality.
• When copying data with the preinstalled application, Drag'n Drop
CD+DVD, the type of the destination media should be same as that of
the source media.
• After creating an audio CD, you cannot add data into it even if it is not
full.
1
1-17
Advertisement
Table of Contents
