Panasonic GP-X Series User Manual page 88

Setting example
<Setting 1 mode>
Analog voltage
output scale
Press
POINT
82
Ramco Innovations www.ramcoi.com
Press to select "o-ScL".
to select "SLOPE".
<Value entry mode>
Press and hold
<Teaching mode>
Upper line:
Detected
distance value
After teaching, the value
Lower line:
Output voltage
entry mode starts.
value
・Enter the detected value on the upper line and the displayed value on the
lower line.
・If the setting is incorrect, an error is displayed. Press the
cancel the error and repeat entry.
<Setting error>
・The detected value is beyond the detection distance range. (Also, the full-
scale value cannot be entered.)
・The voltage output setting exceeds
Press to select "1-ScL".
Press
another digit.
Press
change the number.
.
Set
5.5V.
Phone 800-280-6933 nsales@ramcoi.com
to move to
<Value entry mode>
or to
Press to move to
another digit.
Press or
change the number.
to
key to