If sampling time (ts) = 0
Trigger level
Displayed value
ON
Internal
sampling
OFF
ON
Strobe
output
OFF
With sample hold (S-h) and sampling time "0", the point exceeds the trigger
level by the trigger hysteresis; be sure to enter a sampling time other than "0".
Ramco Innovations www.ramcoi.com
Trigger point
0
Trigger delay
td
Start of holding mode
End of sampling
Trigger point
Output of result of
sampling period 1
td
Sampling
period 1
Phone 800-280-6933 nsales@ramcoi.com
Measured value
Measurement
Displayed value
Output value
End of sampling
Measured
value
Output of result of
sampling period 2
Sampling
period 2
Trigger
hysteresis
Time
41