5.
6.
7. Turn the terminator switch ON at the two units located at both ends of the
The procedure 6 and 7 explain the controller communication unit (GP-
XCOM). For the BCD output unit (GP-XBCD), connect the exclusive cable
with connector on one end (GP-XBCC3).
Ramco Innovations www.ramcoi.com
A
A
below.
Terminator switch ON
network. Turn the terminator switch OFF at the other units.
B
Controller communication
unit (GP-XCOM)
Terminator switch OFF
Phone 800-280-6933 nsales@ramcoi.com
Link cable for controller
communication unit
(SL-F150/F250/F1000)
Terminator switch ON
-
21