Panasonic GP-X Series User Manual page 83

<Setting 1 mode>
<Display scale>
Ramco Innovations www.ramcoi.com
Setting example
Press
Press to select "SLOPE".
Press and hold
・Enter the detected value on the upper line and the value to be displayed
on the lower line.
・If the setting is incorrect, an error is displayed. Press the
cancel the error and repeat entry.
<Setting error>
POINT
・The detected value is beyond the detection distance range. (Also, the full-
scale value cannot be entered.)
to select "d-ScL".
Press to select "1-ScL".
<Value entry mode>
.
<Teaching mode>
After teaching, the value
entry mode starts.
Set
Phone 800-280-6933 nsales@ramcoi.com
Press to move to
another digit.
Press or to <Value entry mode>
change the number.
Press
another digit.
Press
change the number.
to move to
or to
key to
77