High Flow Table Vacuum Controls
High Flow Table Vacuum Controls
Introduction
Your printer uses a High-flow vacuum system to secure media to the printer table. Three vacuum
pumps are used to evacuate the air inside the table. In order for the system to work effectively
during printing, all the holes on the vacuum table must be covered.
Vacuum Zone Legend
Label
1
2
3
4
Vacuum Table
The table can be used with two print zones, A and B. This allows 2-Up Dual Origin printing (see
Chapter 6). Open vacuum holes must be masked for printing.
96
Chapter 5 - Operating the Vacuum System
Hardware Description
Vacuum Gauge
Print Start Button
Origin for Print Zone A
Origin for Print Zone B