Canon Arizona 6100 XTHF Mark II Series User Manual page 129

4. Select New Spot Channel from the Channels menu to open the Add Spot Channel dialog.
[11] Add Spot Channel
5. Within the Add Spot Channel dialog, enter the following information:
• Name – Enter the name "Spot 1" or "Spot 2". This name is specifically reserved in RIP-Queue
for this type of workflow, using any other name requires more steps to make spot information
addressed by the Rip software.
Note: For instructions on how to use a naming convention other than Spot 1 or Spot 2, refer to
How to Name Your Spot Data on page 135
• Solidity – Set the solidity to 10%
• Edit the channel Color by double-clicking on the swatch. Set the spot color to a color similar to
the spot ink in your printer. Since white can be hard to distinguish, this color can be any value
that will help you see the design better.
6. Click OK to save your changes and close the Add Spot Channel dialog.
Chapter 7 - How to Manage a White Ink Workflow
Create Spot Data in Photoshop
129