Canon Arizona 6100 XTHF Mark II Series User Manual page 19

Grounding
WARNING
• Do not scratch, abrade, heat, twist, bend or place a heavy object on the power cord or cause
any other damage to it. The use of a damaged power cord (e.g. exposed core wire or broken
wire) could result in an electrical shock, fire or malfunction of the machine. If the power cord
is damaged, immediately switch off the power switch and unplug the power cord from the
power outlet. Contact your authorised service representative.
• Do not use a multiple outlet adapter or an extension cord. Contact your authorised service
representative if an extension cord is required. The use of an extension cord may result in fire
or electrical shock.
• Only use a power cord that is fitted with a protective earth conductor.
• When the machine has to be connected via a wall socket, place the machine close to a wall
socket that is easily accessible. The power plug serves as a disconnecting device.
• Do not route the power cords in such a way that they can be stepped on or tripped over.
• Connect the power cord to a power outlet that is equipped with a protective earthing (PE)
terminal.
• This equipment is not designed for connection to an IT power system. An IT power system is
a voltage network in which the neutral wire is not connected to ground.
• Do not disconnect the machine's separate grounding terminal. This is a machine with high
leakage current, so earth connection is essential before connecting the mains supply and
before operating the machine. It is the responsibility of the customer to provide a suitable
building installation (reliable protective earthing connection) in accordance with local
legislation.
Installation
WARNING
• The machine may be transported, assembled, installed, moved and repaired only by an
authorized service representative.
• The installation of accessories and options not permitted for the machines may constitute a
violation of the Safety Regulations and Directives, and can also damage the machine.
• Consult your authorized service representative for details on which accessories and options
are permitted for the machine.
• Only use cables specified by the manufacturer.
• Place the machine on a horizontally level surface of sufficient support.
• Do not place the machine in a location that is subject to vibrations and shocks.
• Do not use flammable sprays, liquids or gases near the product as this can cause fire.
Space requirements and operation precautions
WARNING
• For keeping the chemical emission below the limits do not place the machine in a room
which is too small or insufficiently ventilated. See the Product Safety Data Sheet of the
machine for the ventilation recommendations.
Safety and Environment Information
Chapter 2 - Safety Information 19