Configure ONYX Thrive for White Ink
Introduction
This section describes how to configure ONYX Thrive to recognize white ink workflow elements
and thus allow you to apply the approach that is best for your print job application. In order for
the ONYX Thrive software to successfully address white ink workflow data, there are options in
the software that must be configured. It also explains how you need to use specific ONYX media
profiles to prepare white ink print jobs.
Procedure
1. In your Quick Set, or in Job Editor / Job Properties / PS/PDF Options turn off two-stage processing
(make sure the box is not checked).
ONYX Thrive software will now accept print jobs with white ink data.
[4] Turn off Two Stage Processing
2. To prepare a print job for white ink you need to use an ONYX media profile (media model).
White Ink print jobs require media profiles with a particular ink configuration and spot colors
defined. Media profiles for your printer are available from our website: https://
graphiplaza.cpp.canon
Arizona Quality-Layered print mode is used to print white ink applications such as under-printing
for non-white media, over-printing for backlit applications viewed 2
for a day-night application.
Configure ONYX Thrive for White Ink
nd
surface or as middle layer
Chapter 7 - How to Manage a White Ink Workflow
117