Weekly
Clean Printheads
Empty the Waste Trays
Every two weeks
Replace UV Lamp Filters
Monthly
Clean UV Lamp window
Check Coolant level
Clean Glass Rails
Incident based, as needed
Remove Ink from Table
Clean Linear Gantry Rails
Needed when indicated on the oper‐
ator panel
Change Ink Fil-
After 50 liters of
ters
ink, or if pigment
looks weak
Bleed ink filter
After 5 Bags
(CMYKcm)
Bleed ink filter
After 1 Bag
(White)
Change both UV
After 500 hours
Lamps
or when curing is
insufficient
Procedure
Cleaning (Swabbing) the Printheads on page 167
•
•
Empty the Waste Ink Tray on page 179
Procedure
How to Change the UV Lamp Filters on page 170
•
Procedure
Clean UV Lamp Quartz Window on page 185
•
Fill Coolant Bottle on page 182
•
Cleaning the Glass Rails on page 183
•
Procedure
Remove Ink from the Table on page 178
•
Clean the Gantry Rails on page 184
•
Procedure
Change Ink Filter on page 186
•
Bleed an Ink Filter on page 189
•
Bleed an Ink Filter on page 189
•
How to Change a UV Lamp Bulb on page 172
•
Maintenance Guidelines
Chapter 9 - Printer Maintenance
153