How To Name Your Spot Data - Canon Arizona 6100 XTHF Mark II Series User Manual

How to Name Your Spot Data

In order for ONYX Thrive to correctly distinguish and address Spot data, naming conventions for
this data must be adhered to both in the image editing creation stage and the Rip. While using
the default name Spot 1, is the simplest route requiring the fewest number of steps, there may be
instances when using something other than this is desirable. For instance, when data is created
by one individual and printed by another, naming spot data may make desired output results
more clear. As well, if English is not your native language, use a name that is more meaningful in
your language to be more effective. Please do not use the name "White" as this color flags ONYX
Thrive to be treated in a particular manner not desired for this workflow.
When you create a new Spot Swatch in Illustrator with your preferred name perform the
following steps:
Procedure
1. Open the file in Job Editor. Select the Printer and Media tab. Click on Change Profiles in the Color
Management section. Select the Output tab and click on Spot Channel Replacement.
[16] Spot Channel Replacement
Chapter 7 - How to Manage a White Ink Workflow
How to Name Your Spot Data
135