Print Head Deep Cleaning - Canon PIXMA iP6220D Series Quick Start Manual

Print Head Deep Cleaning
If print quality does not improve by standard print head cleaning, try print head deep cleaning,
which is a more powerful process. Print head deep cleaning consumes more ink than standard
print head cleaning, so perform this procedure only when necessary.
1
Ensure that the printer is on.
2
Start print head deep cleaning.
(1) Press the Menu button.
(2) Use the
~
... buttons to select Maintenance/settings and then press the OK
button.
(3) Use the
~
buttons to select Maintenance and then press the OK button.
(4) Use the buttons to select Deep cleaning and then press the OK button.
The confirmation screen is displayed.
(5) Use the . . . buttons to select Yes and then press the OK button.
~Important
Do not perform any further operation until the print head deep cleaning
finishes. This takes about 1-2 minutes.
FElNote
52
After print head deep cleaning finishes, print the nozzle check pattern to verify
that the print head nozzles are clean.
See "Printing the Nozzle Check Pattern" on page 49.
If the problem persists, perform the print head deep cleaning again.
If the problem persists, the printer may have run out of ink.
See "Replacing a FINE Cartridge" on page 54.
If the problem continues to exist, the printer may be damaged. In this case,
contact the Customer Care Center.