Canon PIXMA iP6220D Series Quick Start Manual page 106

t'lK
"'Set
v;
Manual head al ign
Enter the number of
the pattern with fewest
~~;;~!iii:
I
WNote
Adjusting the Print Head Manually
If the automatic print head adjustment does not work or if you wish to adjust
the print heads manually, follow the procedure below.
1. With the printer on, load a sheet of A4/Letter-sized plain paper in
the auto sheet feeder.
2. Press the Menu button.
3. Use the
~ ~
buttons to select Maintenance/settings and then press
the OK button.
4. Use the
~ ~
buttons to select Maintenance and then press the OK
button.
5. Use the A T buttons to select Manual head align and then press the OK
button.
6. When the confirmation message is displayed, use the
A
T buttons to
select Yes and then press the OK button.
The print head alignment pattern will be printed.
7. The message of "Did the patterns print correctly?" is displayed on
the LCD.
Ensure that the patterns were printed normally and use the A T buttons
to select Yes and then press the OK button.
8. Examine the printed pattern and enter the number of
column "A" with fewest white stripes using the
~ ~
buttons.
9. Use the T button to move the cursor to column "8"
and then enter the number of column "8" with fewest
white stripes using the
~ ~
buttons.
10. Repeat the same procedure and enter the pattern
numbers up to column "N".
11. After entering the number of all columns, press the OK
button.
II
POWER Lamp and Alarm Lamp Flash Alternately
Possible Cause
I
Try This
An error that requires contacting the Disconnect the printer cable from the printer, and then turn the printer off and unplug
Customer Care Center may have occurred the printer from the power supply. Plug the printer back in and turn the printer back on
after leaving it for a while.
If the problem remains, contact the Customer Care Center.
60