Printing a Specified Area - Trimming
You can print a specified area of the photo displayed on the LCD.
W Note
Please trim the photo after specifying the page size, media type, Borderlessj
Bordered on each settings screen. If you change the settings after trimming
the photo, the trimmed selection will be lost.
1
Select the photo to trim.
2
Set the trimming mode.
Press the
Trimming
button.
The printer is now in trimming mode.
Trimming guide
3
Trim and rotate the sections you wish to print.
eTrimming
button: You can rotate the trimming area.
e
A
~
<lllIIII
~
buttons: You can move the area for trimming.
e~~
buttons: You can enlarge or reduce the trimming area.
4
Finalize the trimming area.
Press the OK button.
The trimming area is fixed.
22
WNotes
• When the trimming area has been fixed, a yellow trimming guide
appears in the photo displayed on the LCD.
• You can modify the trimming area by pressing the
Trimming
button
once again even after the trimming area has already been finalized.
•
If you want to cancel the trimming setting, press the
Trimming
button
and then the
Stop/Reset
button in the trimming screen. Removing
the memory card also cancels the trimming setting.
• You cannot save the trimmed photo in the memory card.