Canon PIXMA iP6220D Series Quick Start Manual page 9

Basic Printing
II
Preparing the Printer
• For detailed information on the specialty media Canon provides for use with its
various printers, see "Using Specialty Media" on page 9.
• Consult "Printing Media" in the User's Guide for detailed instructions on how to load
specialty media into the printer.
1
Flatten the four corners of the paper before loading it.
W
Note When paper is curled, gently bend it in the opposite direction until the
paper becomes completely flat.
2
Prepare to load paper.
(1) Open the paper support.
(2) Pull out the paper output tray.
(3) Move the paper thickness lever to the
correct position for the media in use.
Move the lever to its left position for
plain paper, and move it to the right
position for envelopes and T-Shirt
Transfers.
See "Canon Speciality Media" on page
10.
W
Note
• Place the printer on a flat surface.
• Do not place any obstacles in front of the printer to keep this area
open for paper which is ejected. .
• Remove each sheet as soon as paper is ejected. If the paper output
slot is stacked with printed sheets it may interfere with the printer's
ejecting process.
• When performing duplex printing, pay great attention to the dust and
stain on the area (desk, etc.) where the printed paper is ejected.
Printing with dust and stain remaining on this area can have a bad
effect on the printing result and printer.
5