Canon PIXMA iP6220D Series Quick Start Manual page 114

II
Cannot Print Properly through Wireless communication
The following are the causes of the trouble may occur when printing through infrared
communication. For the trouble when printing through Bluetooth communication, refer
to the Bluetooth User's Guide.
Possible Cause
I
Try This
The installation place, distance, and/or angle Check the installation place, distance, or angle.
is improper See "Performing Infrared Communication" on page 40.
During infrared communication, infrared rays If infrared communication between the infrared ports of the printer and
were interrupted or another infrared the mobile phone is interrupted by any obstacle for ten and several seconds or
communication device is operating nearby longer during printing, the paper on which data is being printed is ejected and
the printer is reset. Remove the obstacle and retry printing.
If an infrared communication device is operating nearby, interference can occur
and fail in printing the document to the end. While printing a document through
infrared communication, do not operate another infrared communication device,
such as a remote controller of a lV, nearby.
The requirements for infrared communications Use the mobile phone or PDA, which has an IrDA port compatible with the image
with the mobile phone are not satisfied data transfer using the infrared communication.
68