Canon PIXMA iP6220D Series Quick Start Manual page 90

• Changing the Bluetooth Settings-Bluetooth settings
You can change the
Bluetooth settings
such as device name of a printer and passkey.
1
Turn on the printer.
2
Connect the Bluetooth unit BU-20 to the direct print port.
FF'Note
The
Bluetooth settings
screen does not appear until the Bluetooth unit
is connected.
3
Display the Bluetooth settings screen.
(1) Press the Menu button.
(2) Use the
~
.. buttons to select
Maintenance/settings
and then press the
OK
button.
(3) Use the
~
.. buttons to select
Device settings
and then press the
OK
button.
(4) Use the ...... buttons to select
Bluetooth settings
and then press the
OK
button.
The
Bluetooth settings
screen is displayed.
4
Change the setting.
(1) Use the buttons to select the setting item you want to change.
(2) Use the buttons to select the items you want to set then press the
OK
button .
• Setting Items
44
• Device name:
• Access refusal:
• Security:
• Passkey:
Select the device name of th is printer displayed on the screen of
the Bluetooth devices.
When you set iP6220D-2, the printer name on the Bluetooth device
is "Ca non iP6220D-2".
The initial value is set to iP6220D-1.
Selecting
ON
will disable search and printing from Bluetooth
devices.
Selecting
Enable
will enable a passkey. Setting a passkey will
prevent incorrect access from other Bluetooth devices.
You can change the passkey. The passkey refers to an identification
numberto be determined. It is used to prevent incorrect access from
oth er Bluetooth devices.
The initial value is set to "0000".
After you change the passkey, you are required to enter the new
passkey again. Enter the new passkey to Bluetooth device.