EI9Note
When printing onto Photo Stickers (PS-10l) (16-up), use the following settings.
1. Load Photo Stickers (PS-10l) in the auto sheet feeder.
2. Select 10 x 15 cm/4
11
x 6
11
for the Paper size, and Photo for the Paper
type.
3. Select N-up for Layout, then select 16.
Some PictBridge compliant devices display the Layout option; 2-up,
4-up, 9-up, and 16-up. In this case always select 16-up.
If there are no options on the PictBridge compliant device that
correspond to 2-up, 4-up, 9-up, or l6-up, printing on stickers is not
possible.
By default, Off (No trimming) is selected for Trimming.
• About "Image optimize"
When you have selected Default (selections based on the printer setting), the printer
operates based on the print setting screen.
If you use a Canon PictBridge-compliant device, you can select VIVID, NR, VIVID+NR, or
Face. (Note that these options cannot be selected for some models.)
FJ9Notes
•
When VIVID is selected, green and blue portions of photos are printed
vividly.
• When NR (Noise Reduction) is selected, noise in blue portions, such as
the sky, and dark portions is removed.
• When VIVID+NR is selected, functions of both VIVID and NR are
performed.
• When Face is selected, backlit images are corrected when printed .
• About "Date/File No. print"
By default,
Orf
is selected for this printer.
If you select an image which has had the shooting date embedded in it using a camera
with print mode, select Off for this function. If you select Date, File No., or Both,
the date and/or file number will be printed over the embedded date.
F}9Notes
•
Never disconnect the USB cable during printing.
When disconnecting the USB cable between the product and printer,
follow the device instructions given in the Instruction manual.
• Controls of the digital camera cannot be used for the following:
- Print quality setting
. Printer maintenance
•
For the device operation method and troubleshooting, refer to your
device's manual.
•
For print error messages, see "Cannot Print Properly from the Digital
Camera" on page 65.