Troubleshooting - Canon PIXMA iP6220D Series Quick Start Manual

Troubleshooting
Let's take a look at countermeasures against troubles which may occur during use of the printer.
I§FINote Here, we will discuss errors indicated on the LCD, problems that might occur
during direct printing from the digital camera. If you cannot find the symptom
corresponding to a certain problem, refer to the User's Guide.
• "An Error Message is Displayed on the LCD" on page 58
• "POWER Lamp and Alarm Lamp Flash Alternately" on page
60
• "Cannot See the Display Properly on the LCD/Cannot See the Display on the LCD" on page
61
• "Ink Does Not Come Out/Printing is Blurred/Colors are Wrong/White Streaks" on page 61
• "Back of Paper is Smudged/Paper Does Not Feed Properly/Printed Surface is Scratched" on
page 61
• "Paper Jams" on page 64
• "Cannot Print Properly from the Digital Camera" on page 65
II An Error Message is Displayed on the LCD
If Alarm lamp lights, and an error message is displayed on the LCD, take the corresponding
countermeasure described below.
Message
I
Try Th
is
There are no photos in memory card.
There is no paper. Load paper and
press [OK].
The paper is jammed. Clear the paper
and press [OK].
Ink has run out. Replace the ink
cartridge and close the cover.
U041
The following ink cartridge cannot be
recognized.
U051
U052
U053
U059
Some ink cartridges are not installed
in place.
U075
U076
58
• Photo data edited/processed on the computer should be printed from the computer,
not from the camera.
• There are no proper data in the memory card. See "Memory Cards Supported by This
Printer" on page 8.
Reload the paper correctly and press the OK button.
If paper has jammed in the printer, clear the jam, reload the paper in the printer correctly
and then press the OK button.
See "Paper Jams" on page 64.
Replace the FINE Cartridge, and close the cover. If lines are misaligned or the resulting
output is not satisfactory, carry out the Print Head Alignment.
If printing is in progress and you want to continue printing, press the OK button. Then
printing can continue under the ink out condition with the FINE Cartridge installed.
Replace the empty FINE Cartridge immediately after the printing. The resulting print
quality is not satisfactory, if printing is continued under the ink out condition.
Possible causes are as follows:
• The FINE Cartridge may not be installed properly.
• The FINE Cartridge may not be the compatible with this printer.
Install the appropriate FINE Cartridge. If lines are misaligned or the resulting output is
not satisfactory, carry out the Print Head Alignment.
Some FINE Cartridges are not installed in place.
Install the FINE Cartridges in the appropriate positions.