Setting Up The Card Slot As The Memory Card Drive Of The Computer - Canon PIXMA iP6220D Series Quick Start Manual

2
Press the Save button.
The photos will be saved to a folder created in the location specified below.
The folder will be named automatically according to the date that it was created
(YYVY_MM_DD).
Windows XP/Windows 2000/Windows Me:
My Pictures
folder
Windows 98:
My Documents
folder
Mac
as x
v.l 0.2.1 or later:
Pictures
folder
FI9Note
You can save only the selected photos when you have selected photos
using the search function. For the information about the search function,
see "Searching for Photos with the Shooting Date" on page 20.
Setting up the Card Slot as the Memory Card Drive of
the Computer
The card slot of the printer can also be used as the memory card drive of the computer.
~Important
•
To use the card slot of the printer as the memory card drive of the computer,
the printer must be connected to the computer and the Memory Card Utility
must have been installed for Windows Me/Windows 98/Windows 98
Second Edition. If the utility is not installed, install it following
the installation procedure explained in the Easy
Setup Instructions.
• When
Read/write mode
is selected, you cannot print photos in the memory
card.
After you are finished with using the card slot as a memory card drive for
your computer, remove the memory card, then be sure to select
Read-only
mode
again.
1
Ensure that the printer and the computer are turned on.
2
Display the Read/write attribute screen.
(1) Ensure that no memory card is in the card slot. If a memory card is in the card
slot, remove it.
(2) Press the
Menu
button.
(3) Use the
<411 ..
buttons to select
Maintenance/settings
and then press the
OK
button.