Installing A Heat Exchanger Module - Huawei NetCol8000-C190 User Manual

NetCol8000-C190 In-room Chilled Water Smart
Cooling Product
User Manual (2022, Singapore STT)
Figure 3-8 Removing side panels and screws
Step 4 Reinstall the side panel opposite to the pipe routing direction (left side panel for
right pipe routing or right side panel for left pipe routing).
Step 5 Remove the fan module from the pallet and place it on the ground steadily.
----End

3.4.4 Installing a Heat Exchanger Module

Procedure
Step 1 Remove the top cover from the heat exchanger module.
Figure 3-9 Removing the top cover
Step 2 Remove the EPE foams and protective panels.
Issue 02 (2022-03-30) Copyright © Huawei Technologies Co., Ltd.
3 Installation
35