Replacing A Fan - Huawei NetCol8000-C190 User Manual

NetCol8000-C190 In-room Chilled Water Smart
Cooling Product
User Manual (2022, Singapore STT)
Step 5 Connect the cable terminal to the new T/H sensor and install the new T/H sensor
in the original position.
Step 6 Close the front door.
----End

7.3 Replacing a Fan

Context
Recommended tools and materials: Phillips screwdriver, new fan
Exercise caution during replacement as the fan is heavy.
Two persons are required to move the fan.
Procedure
Step 1 Tap Shutdown on the home screen of the display module.
Exercise caution because the device is still energized after it is shut down on the
screen of the display module.
Step 2 Open the front door, and turn off the active power switch QF1, standby power
switch QF2, and the corresponding fan switch.
Step 3 Remove the screws from the fan shutter and remove the shutter.
Issue 02 (2022-03-30)
NO TE
Before installing the new T/H sensor, check that its DIP switch settings are consistent with
the DIP switch settings of the old T/H sensor.
CA UTION
NO TICE
NO TICE
Copyright © Huawei Technologies Co., Ltd.
7 Parts Replacement
114