Installing A Fan Module - Huawei NetCol8000-C190 User Manual

NetCol8000-C190 In-room Chilled Water Smart
Cooling Product
User Manual (2022, Singapore STT)
Context
Before connecting chilled water pipes, exhaust nitrogen used for avoiding injury.
Procedure
Step 1 Slowly open the exhaust valve to exhaust nitrogen.
Step 2 Fasten the exhaust valve when no air exhausts at the valve.
----End

3.4.3 Installing a Fan Module

Procedure
Step 1 Open the buckles on the package and remove the wooden boards.
Figure 3-6 Removing wooden boards
Step 2 Remove the eight EPE foams.
Figure 3-7 Removing the EPE foams
Step 3 Remove the protective panels from the left and right sides of the fan module, and
remove the screws at the four corners.
Issue 02 (2022-03-30)
D ANGER
Copyright © Huawei Technologies Co., Ltd.
3 Installation
34