Network setting for connection
The following shows the network setting for a configuration personal computer when connecting the computer to an MES
interface module via a hub.
Operating procedure
1.
Set the same value for the network portion of the IP addresses for a configuration personal computer and an MES
interface module.
Network part
192.168. 3.
255.255.255.
Default value of
MES interface module
2.
Set the network setting for the configuration personal computer in the "Internet Protocol Version 4 (TCP/IPv4) Properties"
screen.
(Example) Microsoft Windows 7 Ultimate
Select [Control Panel] [Network and Internet] [Network and Sharing Center] [Change adapter settings].
Select and right-click [Local Area Connection], then select [Properties] from the shortcut menu.
Select "Internet Protocol Version 4 (TCP/IPv4)" in the "Local Area Connection Properties" screen, and click the [Property]
button.
The "Internet Protocol Version 4 (TCP/IPv4) Properties" screen appears.
3.
Restart the personal computer to enable the network setting.
4 PROCEDURE BEFORE OPERATION
60
4.2 Starting an MES Interface Module and Configuration Personal Computer
Set the same value.
Host part
3
0
Configuration personal computer
Network part
Host part
192.168. 3.
100
0
255.255.255.
Set different values.