Mitsubishi Electric MELSEC iQ-R Series User Manual page 109

Trigger Conditions
Setting item
Trigger Condition Configuration
Settings
Trigger Buffering Setting (optional)
Setting item
Event/Condition Type Common Settings
Event/Condition Type Individual Settings
*1 When the data type of the monitoring target is "Bit", "[INT]1" in the comparison target indicates 'ON'.
Setting content
Configuration Type Single Event
Condition Combination Type 
Trigger Buffering Disable
Event/Condition Type
Detail Type
Monitoring Target
(Data Type)
Condition
Comparison Target
(Data Type)
1.
Set each setting item according to the following table
and click the [Edit] button.
2.
Set each item according to the following table, and click
the [OK] button.
"[INT]1" in "Comparison Target" can be set in
the "Integer Type Constant Settings" screen.
"Comparison Target"  "Constant" 
"[Integer]"
Setting content
Condition (Value Monitoring)

[TAG]GettingData.ReportingTrigger
Bit
=
*1
[INT]1

8.5 MES Interface Function Setting
8 OPERATION EXAMPLE
107
8