Odbc Setting; Odbc Setting Procedure - Mitsubishi Electric MELSEC iQ-R Series User Manual

8.4

ODBC Setting

This section shows the procedure for configuring the ODBC setting before setting parameters in MES Interface Function
Configuration Tool.

ODBC setting procedure

1.
Start ODBC Data Source Administrator.
Enter the following in the command prompt.
• %SystemRoot%\system32\odbcad32.exe
2.
Select the [System DSN] tab and click the [Add] button.
3.
Select "Microsoft Access Driver(*.mdb, *.accdb)", and
click the [Finish] button.
4.
Enter 'SAMPLE' in the "Data Source Name" and click
the [Select] button in the "Database".
Any data source name can be set.
The name set above is used for the data
source name in the "Target Server Individual
Settings" in the "Target Server Settings".
5.
Select 'Sample_DB.accdb' in the "Database Name" and
click the [OK] button.
The database name is a name for accessing
an Access database.
Specify a save destination for the created
database tables.
6.
Select "None" in the "System Database" and click the
[OK] button.
7.
Click the [OK] button in the "ODBC Data Source
Administrator" screen.
8 OPERATION EXAMPLE
8.4 ODBC Setting
8
93