DBS3900 (Ver.B)
Installation Guide
Step 4 Place an OMB onto the back mounting plate, and then use M6x16 bolts to secure the back
mounting plate on the attachment plate at the bottom of the OMB until the tightening torque
reaches 4.8 N·m, as shown in
Figure 10-9 Installing the OMB
----End
10.3 Installing a BBU
This section describes the procedure and precautions to be taken for installing a BBU in an OMB
when a DBS3900 is deployed outdoors.
Procedure
Step 1 Install the mounting ears on both sides of the BBU reversely.
1.
Issue 06 (2011-09-15)
Remove the mounting ears, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Outdoor Scenario with AC Power Supply (BBU Installed
Figure
10-9.
Figure
10-10.
in an OMB)
336