Installing Power Cables - Huawei DBS3900 Installation Manual

DBS3900 (Ver.B)
Installation Guide
Figure 7-65 Leading cables through cable outlet modules
Step 2 Use rubber caps to seal the idle cable holes.
Step 3 Tighten the screws in the front of the cable module to fix the module.
----End

7.5.3 Installing Power Cables

When a DBS3900 is deployed outdoors with DC power supply and the BBU is installed in a
TMC11H, power cables such as an input power cable for the TMC11H, BBU power cable, and
RRU power cables must be installed.
Installing an Input Power Cable for the TMC11H
An input power cable for the TMC11H connects a TMC11H to external power equipment,
feeding external power into the TMC11H.
Prerequisite
l
l
Context
Table 7-5
Table 7-5 Specifications of an input power cable for the TMC11H
Cable
Input power
cable for the
TMC11H
Issue 06 (2011-09-15)
The tools, such as a Phillips screwdriver, a cable cutter, and a multi-purpose crimping tool,
are ready.
The PGND cable and equipotential cable are installed.
lists the specifications of an input power cable for the TMC11H.
RTN(+) wire
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Outdoor Scenario with DC Power Supply (BBU Installed
One End The Other
End
OT terminal Depending on
2 the external
(M6, 4 mm )
equipment
in a TMC11H)
Description
Black
192