Figure 55
Hydraulic System
Maintenance
The reservoir is filled at the factory with
approximately 4.7 L (5 quarts) of high-quality tractor
transmission/hydraulic fluid. The recommended
replacement fluid is as follows:
Toro Premium Transmission/Hydraulic Tractor Fluid
(Available in 5 gallon pails or 55 gallon drums. See parts
catalog or Toro distributor for part numbers.)
Alternate fluids: If the Toro fluid is not available,
Mobil® 424 hydraulic fluid may be used.
Note:
Toro will not assume responsibility for damage
caused by improper substitutions.
Note:
Many hydraulic fluids are almost colorless,
making it difficult to spot leaks. A red dye additive for
the hydraulic system fluid is available in 20 ml (2/3 fl
oz) bottles. One bottle is sufficient for 15 to 22 L (4
to 6 gallons) of hydraulic fluid. Order part number
44-2500 from your Authorized Toro Distributor.
Hydraulic System Safety
•
Seek immediate medical attention if fluid is injected
into skin. Injected fluid must be surgically removed
within a few hours by a doctor.
•
Ensure that all hydraulic-fluid hoses and lines are
in good condition and all hydraulic connections
and fittings are tight before applying pressure to
g001656
the hydraulic system.
•
Keep your body and hands away from pinhole
leaks or nozzles that eject high-pressure hydraulic
fluid.
•
Use cardboard or paper to find hydraulic leaks.
•
Safely relieve all pressure in the hydraulic system
before performing any work on the hydraulic
system.
Checking the Hydraulic
System
Service Interval: Before each use or daily
Check the level of the hydraulic fluid before you first
start the engine and daily thereafter.
1.
Position the machine on a level surface.
2.
Move the motion-control levers to the
N
-
EUTRAL
Note:
Run the engine at the lowest possible
rpm to purge the system of air.
Important:
50
position and start the engine.
LOCK
Do not engage the PTO.