Toro Groundsmaster 7200 Series Operator's Manual page 37

Changing the Engine Oil And Filter
Service Interval: After the first 50 hours
Every 150 hours
If possible, run the engine just before changing the
oil because warm oil flows better and carries more
contaminants than cold oil.
1. Position the machine on a level surface.
2. Open the hood.
3. Change the oil (Figure
Figure 33
4. Replace the oil filter
33).
(Figure 34).
g031623
5. Fill the crankcase with oil; refer to
Engine-Oil Level (page
37
Figure 34
Checking the
36).
g027477