ABB TZIDC Manual page 42

42 TZIDC DIGITAL POSITIONER | DS/TZIDC-EN REV. G
—
... Ordering Information
... Main ordering information TZIDC
TZIDC digital positioner, intelligent, configurable, with indicator and operator panel
Connections
Cable: Thread ½-14 NPT, air pipe: Thread ¼-18 NPT
Cable: Thread M20 × 1.5, air pipe: Thread ¼-18 NPT
Cable: Thread M20 × 1.5, air pipe: Thread G ¼
Cable: Thread G ½, air pipe: Thread Rc ¼
Option Modules for Analog or Digital Position Feedback
Without
Plug-in module for analog position feedback, signal range 4 bis 20 mA, two-wire
Plug-in module for digital position feedback
Plug-in module for analog position feedback, signal range 4 bis 20 mA, two-wire, and digital position feedback
Optional Mechanical Kit for Digital Position Feedback
Without
Mechanical kit for digital position feedback with proximity switches SJ2-SN (NC or logical 1)
Mechanical kit for digital position feedback with 24 V AC / DC microswitches (change-over contacts)
Design (Varnish / Coding)
Standard
Higher Stiffness + Lower Air Capacity
Protection Class IP 66 / NEMA 4X
Increased Corrosion Protection
* Only for model with mechanical position indicator, no IECEx
** Not for explosion protected version and only for model with mechanical position indicator
*** Only with Type Double Acting
Continued see next page
X X XX X
2
5
6
7
0
1
3
5
00
10*
50**
1
H***
P
S