Table of Contents
Advertisement
7.
Open the hood.
8.
Place a shallow pan or rag under the filter to
catch oil.
9.
Change the oil filter.
Figure 44
10.
Remove the oil-fill cap and slowly pour
approximately 80% of the specified amount of oil
in through the valve cover.
11.
Check the oil level.
12.
Slowly add additional oil to bring the level to the
upper hole on the dipstick.
13.
Replace the fill cap.
14.
Close the hood.
Fuel System
Maintenance
DANGER
In certain conditions, fuel is extremely
flammable and highly explosive. A fire or
explosion from fuel can burn you and others
and can damage property.
Refer to
Fuel Safety (page 17)
list of fuel related precautions.
Draining the Water
Separator
Service Interval: Before each use or daily
1.
Park the machine on a level surface, engage the
parking brake, and lower the loader arms.
2.
Shut off the engine and remove the key.
3.
Open the hood.
4.
Place a clean container under the water
separator.
g027477
1. Water separator
5.
Loosen the drain valve on the bottom of the filter
canister and allow the water to drain.
6.
When finished, tighten the drain valve.
7.
Close the hood.
34
for a complete
Figure 45
2. Drain valve
g365558
Advertisement
Table of Contents
