Toro TX 700 Operator's Manual page 13

•
To turn right, rotate the traction control clockwise.
•
To turn left, rotate the traction control
counterclockwise.
•
To stop the machine, release the traction control.
Note:
The farther you move the traction control in
any direction, the faster the machine moves in that
direction.
Figure 8
Figure 9
Loader Arm/Attachment-Tilt Lever
Slowly move the lever to operate the loader arms and
tilt the attachment.
Note:
The detent (float) position allows attachments
such as the leveler and the hydraulic blade to follow
the contours of the ground (i.e., float) when grading.
g259649
g259648 1. Detent (float)
position—push the lever
fully forward.
2. Lower the loader arms.
3. Raise the loader arms.
By moving the lever to an intermediate position (e.g.,
forward and left), you can move the loader arms and
tilt the attachment at the same time.
Loader-Control-Reference Bar
The loader-control-reference bar helps stabilize your
hand while operating the loader arm/attachment-tilt
lever (Figure 4).
13
Figure 10
4. Tilt the attachment
rearward.
5. Tilt the attachment
forward.
g356466