Controls
Become familiar with all the controls before you start
the engine and operate the traction unit.
Control Panel
1. Throttle lever
2. Traction-enable switch
3. Power socket
4. Key switch
5. Hour meter
Key Switch
The key switch, used to start and shut off the engine,
has 3 positions: O
, R
FF
Throttle Lever
Move the control forward to increase the engine speed
and rearward to decrease speed.
Reference Bar
When driving the traction unit, use the reference bar
as a handle and a leverage point for controlling the
traction control and the auxiliary-hydraulics lever. To
ensure smooth, controlled operation, do not take
your hands off the reference bars while operating the
machine.
Figure 4
6. Loader-arm/attachment-tilt
lever
7. Reference bar
8. Traction control
9. Auxiliary hydraulics switch
10. Loader valve lock
, and S
.
UN
TART
Traction-Enable Switch
The traction control is automatically disabled when
starting the machine. Toggle the traction-enable
switch after starting the machine to use the traction
control.
Traction Control
1. Reference bar
2. Traction control
•
To move forward, move the traction control
forward.
g411223
•
To move rearward, move the traction control
rearward.
Important:
for obstructions and keep your hands on the
reference bar.
12
Figure 5
Figure 6
When reversing, look behind you
Figure 7
g259646
g259645
g259647