Table of Contents
Advertisement
Moving a Non-Functioning
Machine
Important:
Do not tow or pull the machine
without first opening the tow valves, or you will
damage the hydraulic system.
1.
Shut off the engine and remove the key.
2.
Open the hood and secure the hood prop.
3.
Using a wrench, turn the tow valves on the
hydraulic pumps twice counterclockwise.
Figure 26
1. Tow valve
4.
Tow the machine as required.
5.
After repairing the machine, close the tow valves
before operating it.
Hauling the Machine
Use a heavy-duty trailer or truck to haul the machine.
Use a full-width ramp. Ensure that the trailer or truck
has all the necessary brakes, lighting, and marking as
required by law. Please carefully read all the safety
instructions. Knowing this information could help
you or bystanders avoid injury. Refer to your local
ordinances for trailer and tie-down requirements.
WARNING
Driving on the street or roadway without
turn signals, lights, reflective markings, or a
slow-moving-vehicle emblem is dangerous
and can lead to accidents causing personal
injury.
Do not drive the machine on a public street
or roadway.
Selecting a Trailer
g357135
WARNING
Loading a machine onto a trailer or truck
increases the possibility of tip-over and could
cause serious injury or death
• Use only full-width ramps.
• Ensure that the length of ramp is at least 4
times as long as the height of the trailer or
truck bed to the ground. This ensures that
ramp angle does not exceed 15 degrees on
flat ground.
g365261
23
(Figure
27).
Advertisement
Table of Contents
