Sanyo FWZH776F Owner's Manual page 59

Clock
Configure the Clock, Time zone and Daylight Saving
Time settings.
If the Clock is not set correctly, Scheduled Recording
does not work properly.
1
Select a desired item using [ K / L ],
then press [ OK ].
Clock Setting Clock Setting
If this unit is unable to obtain the Clock information
automatically, set up the Clock manually.
2
Enter 'Month' / 'Day' / 'Year' / 'Hour'
/ 'Minute' and Select "AM" or "PM"
using [ K / L / 0 / 1 ], then press [ OK ].
Time Zone Time Zone
Set your Time zone. This unit recognizes 7 Time zones.
2
Select a desired item using [ K / L ],
then press [ OK ].
Time Zone
GMT(Greenwich Mean Time ) - 4 hours
Atlantic
GMT(Greenwich Mean Time ) - 5 hours
Eastern
GMT(Greenwich Mean Time ) - 6 hours
Central
GMT(Greenwich Mean Time ) - 7 hours
Mountain
GMT(Greenwich Mean Time ) - 8 hours
Pacific
GMT(Greenwich Mean Time ) - 9 hours
Alaska
Hawaii
GMT(Greenwich Mean Time ) - 10 hours
Daylight Saving Time (DST) Daylight Saving Time (DST)
Daylight Saving Time is referred to as "Summer Time".
Using this automatic function sets the Clock back 1 hr.
for DST and ahead 1 hr. when DST is over.
2
Select a desired item using [ K / L ],
then press [ OK ].
Activate.
On
Off
Deactivate.
Auto Clock Setting Auto Clock Setting
This unit can set the Time and Date automatically by
referring to a Channel that carries Clock information.
2
Select "On" using [ K / L ], then press [ OK ].
• Channel selection window will appear.
3
Select a Channel using [ K / L ], then press
[ OK ].
• This unit will automatically search for the Clock
information and Display the result.
4
Press [ OK ] to finish.
Initialization
Initializes settings on the unit.
1
Select a desired item using [ K / L ],
then press [ OK ].
Initialize for Network Setting
You can Reset the status of Network settings.
Initialize Settings
You can Reset the status of the Setup Menu.
Initialize for Personal Information
You can Reset your Personal Information to the
Factory Default.
• Confirmation Message will appear.
2
Select "Yes" using [ K / L ], then press
[ OK ].
• When "Initialize for Personal Information" is
Selected, Confirmation Message will appear again.
Select "Yes" using [ K/ L ], then press [ OK ].
Note(s)
• These settings Listed below will remain unchanged
even after the "Initialize Setting".
– Child Lock
– Network Connection
– Remote Control Code
• When "Initialize for Personal Information" is
performed, all Recorded Titles in HDD and the
connected Registered External HDD will be Deleted.
Open Source Software license information on the
Software used in this unit.
1
Press [ OK ] to finish.
FWZH776/676F
OSS
EN - 59
EN