Hdmi - Sanyo FWZH776F Owner's Manual

TV Screen Protection
While the Setup Menu is shown, you do not operate
any key on Remote Control for 15 minutes, then Setup
Menu will be Clear and TV Program can be seen.
While the Title List for CD-DA/JPEG is shown, you do
not operate any key on Remote Control for 15 minutes,
then the Screen Saver will be active.
1
Select a desired item using [ K / L ],
then press [ OK ].
Sets TV Screen Protection to On.
On
Sets TV Screen Protection to Off.
Off

HDMI

1
Select a desired item using [ K / L ],
then press [ OK ].
2
Set the Selected item in references
below.
Note(s)
• Settings for HDMI is only available when there is
HDMI Connection.
HDMI Video Resolution
Selects an HDMI output mode.
HDMI Connection makes this unit automatically output
the most suitable resolution for your TV.
1
Select a desired item using [ K / L ],
then press [ OK ].
Optimum setting will be Selected.
Sets HDMI Resolution to 480
progressive.
Auto
480p
Sets HDMI Resolution to 720
progressive.
720p
1080i
Sets HDMI Resolution to 1080
interlaced.
1080p
Sets HDMI Resolution to 1080
progressive.
• The HDMI mode that is not supported by the
Display device will be Skipped.
If you do not wish to output the Audio through HDMI,
you can set the HDMI Audio output Off.
1
Select a desired item using [ K / L ],
then press [ OK ].
• Set to "Off" when the HDMI Sound is not
needed to be Output.
On
Off
• Your setting will be activated.
"HDMI CEC" allows integrated system control over
HDMI and is part of the HDMI standard.
1
Select a desired item using [ K / L ],
then press [ OK ].
On
Off
When "HDMI CEC" settings are set to "On",
"Standby Setting" will be "Normal Standby".
• When "HDMI CEC" settings are set to "On",
Functions List below will be available.
One Touch Play
When this unit is turned On, the TV also is
turned On and the appropriate External Input
Channel will be Selected automatically. The
appropriate External Input Channel can also be
Selected on your TV automatically, when you
press [ Q (STANDBY/ON) ], [ A (Open/Close) ],
[ B (Play) ], [ TITLE ], [ SCHEDULE REC. ],
[ HOME ], [ SOURCE ], [ CH +/− ], [ the Number
buttons ] when your unit's Power is On.
Standby
When you Press and Hold [ Q (STANDBY/
ON) ] for 2 seconds, it turns Off the Power to
the Standby mode on the TV first and then also
turns the Power Off on this unit.
System Information Get & Set Menu Language
This unit recognizes the Language set for the
TV and automatically sets the same Language
on the Menu for this unit.
If you would like to use this Function, set to
"Auto(XXX)" (Refer to 'Language' on page
53).
(good)
(best)
HDMI Audio Out
Outputs the Audio through HDMI.
Mutes the Audio through HDMI.
HDMI CEC
Activate HDMI CEC function.
Deactivate HDMI CEC function.
EN
EN - 55