Pause Tv - Sanyo FWZH776F Owner's Manual

Note(s)
• During Basic Recording / One-Touch Timer
Recording / Scheduled Recording, if you set a
Scheduled Recording that Starts immediately, a
message will appear on the screen asking whether
you wish to Stop the Recording in progress and Start
the Scheduled Recording. Choose "Yes" if you wish
to Start the Scheduled Recording immediately.
• Basic Recording and One-Touch Timer Recording
will Stop when a Scheduled Recording Starts.
• Recording will temporarily Stop if scrambled signal
is received.
• When the Daylight Saving Time setting is "On", a
Scheduled Program that has Start and End Time
between 2:00 AM and 2:59 AM will not be Recorded
on the second Sunday in March.
The Priority of Overlapped Settings
• A schedule program which was set after a previous
program will be given priority over a previous
program when these schedule programs overlap.
• When 2 or more schedule programs Overlap, the
program with a later start time will be given priority.
• A schedule recording of lower priority will be
cancelled or start from the middle.
• Check the overlapped schedule programs and
change the priority if necessary.
■
When the Starting Time is the same:
For FWZH576F, a program set later (Program B) has priority.
Program A
Program B
Actual recording
For FWZH776F and FWZH676F, a program set later
(Program B and Program C) has priority.
Program A
Program B
Program C
Actual recording
■
When the End Time of the Program currently
being Recorded and the Start Time of
subsequent Program are the same:
The ending of the Program A may be cut off for approx.
20 seconds. When schedule programs overlap, the
schedule recording in progress will end 20 seconds
before the next schedule recording starts.
Program A
Program B
Actual recording Program A
When recording to a DVD, the first 2 minutes (at the
longest) of the beginning of the Program B may be cut off.
Program B
Program B
Program C
Prog. B

PAUSE TV

While watching TV, pressing [ F (PAUSE TV) ] will Start
Recording the currently viewed TV Program to the HDD.
This function is useful when you temporarily leave the TV.
1
While viewing a current Pause TV
Program, press [ F (PAUSE TV) ].
• This unit will automatically Switch to HDD mode and
Start Recording the currently viewed TV Program.
(Rec mode: fixed in "FHD2" Mode)
• The TV Program On-screen will appear to be paused.
■
"PAUSE TV" Playback:
During "PAUSE TV", press [ F (PAUSE TV) ].
1.
• The currently viewed TV Program will be unpaused and
Resumed from the Point where "PAUSE TV" was Started.
■
"PAUSE TV" Stop:
1. During "PAUSE TV", press [
• The Title List will appear.
2. Press [ (EXIT) ]
(EXIT) ] or [ C (Stop) ]
3. Press [
• Confirmation massage will appear.
Select "Yes" using [ K/ L ], then press [ OK ].
4.
• "PAUSE TV" is Stopped.
■
"PAUSE TV" auto Stop:
"PAUSE TV" will automatically Stop when:
• 4 hours has passed since "PAUSE TV" was Started.
• The HDD becomes full during "PAUSE TV".
• A Scheduled Recording Starts.
■
"PAUSE TV" Delete:
The Title Recorded with "PAUSE TV" will not be
Deleted by simply Stopping "PAUSE TV".
1. Press [ TITLE ].
2. Select the Title that has
Select "Yes" using [ K/ L ], then press [ OK ].
3.
• The "PAUSE TV" Title will be Deleted.
The "PAUSE TV" Title will be overwritten if another
"PAUSE TV" is performed.
While viewing a TV Program, press [ F(PAUSE TV) ].
1.
2. Confirmation message will appear. Select "Yes"
using [ K/ L ], then press [ OK ]
• The new "PAUSE TV" will Start and old "PAUSE
TV" Title will be Deleted.
Note(s)
• Changing the Channel during "PAUSE TV" will not
affect the current Recording. ("PAUSE TV" will
not be Stopped and the "PAUSE TV" Title being
Recorded will not be Deleted.)
• "PAUSE TV" will not Start when:
– During the Basic Recording by pressing [ REC ].
– During the Scheduled Recording.
– During the Dubbing.
EN
(EXIT) ] or [ C(Stop) ].
, then press [ CLEAR ].
EN - 33