Front Panel; Rear Panel - Sanyo FWZH776F Owner's Manual

Front Panel

1
1 STANDBY / ON button
• Press to turn On the unit or to turn the unit into
Standby mode.(To completely shut down the
unit, you must unplug the AC power cord)
2 Disc Tray
3 OPEN / CLOSE button *
• Press to Open or Close the Disc Tray.
4 Display window
5 HDD button
• Press to Select the HDD mode or External HDD
mode.
6 DVD button
• Press to Select the DVD mode.
C STOP button
7
• Press to Stop Playback or Recording.
1 PLAY button *
8
• Press to Start Playback or Resume Playback.

Rear Panel

1
R AUDIO L VIDEO
R AUDIO L VIDEO
11
1 VIDEO / AUDIO IN jacks
Use to connect a TV Monitor, AV Receiver or other
devices with a set of RCA Video/Audio Cables.
2 ANTENNA IN jack
Use to connect an Antenna / Cable Box / Satellite
Receiver.
3 Wireless LAN adapter
Use to connect to a Wireless LAN Router.
4 AC Power Cord
• Connect to a standard AC outlet to supply Power
to this unit.
• Unplug this cord from the AC outlet to
completely shut down the unit.
5 LAN terminal
Use a shielded LAN Cable to connect to a Network
device (hub, broadband Router, modem, etc.).
6 USB input
Use to connect an External HDD or USB memory
stick with a Software Update file.
EN - 10
2
2 3
ANTENNA DIGITAL OUT
OPTICAL
IN IN
RESET HDMI OUT USB
5V
OUT OUT
10 9 8 7
FWZH776/676F
FWZH776/676F
3* 4
13
I RECORD button
9
• Press once to Start Recording.
• Press repeatedly to Start the OTR (One-Touch
Timer Recording) and set the Recording Time.
10 / / / CHANNEL buttons
11 AUDIO IN (L2) jacks
Use to connect a TV Monitor, AV Receiver or other
devices with a RCA Audio Cables.
12 S-VIDEO / VIDEO IN (L2) jacks
Use to connect a TV Monitor, AV Receiver or other
devices with a S-Video Cable or RCA Video/Audio
Cables.
13 Infrared Sensor window
Receives IR signal from your Remote Control so
that you can control the unit from a distance.
*
( ) The unit can also be turned On by pressing these
Buttons.
Available on FWZH776F, FWZH676F only.
LAN
900mA
6 5
7 HDMI OUT jack
Use to connect this unit and the Display with an
HDMI Cable.
8 RESET button
To completely shut down the unit, you must go
through the hole to push on the RESET Button.
9 DIGITAL OUT (OPTICAL) jack
Use to connect to another External device with
a Digital Audio Optical Input jack with the Digital
Audio Optical Cable.
10 ANTENNA OUT jack
Use to connect an RF Coaxial Cable to pass the
signal to the ANTENNA IN on your TV.
11 VIDEO / AUDIO OUT jacks
Use to connect a TV/Monitor, AV Receiver or
other devices with a set of RCA Video/Audio
Cables.
5 6 7 8* 9
12 11
4
AC plug
10