Sanyo FWZH776F Owner's Manual page 46

Easy Connect Easy Connect
Select this if your Wireless Networks has a PBC
*1
button . It is the easiest way to set up a wireless
Connection. If it fails, try "Easy Connect" again
*1
PBC (Push Button Configuration) button may be called
as your Router's given name. Refer to the Router's
Manual for more details.
*2
If it continuously fails, then refer to the Router's
Manual for more details.
4
Select "Easy Connect" using [ K / L ],
then press [ OK ].
Push Button Method
5
Select "Push Button Method" using
[ K / L ], then press [ OK ]
6
Press the PBC button on your
Wireless Networks.
• Network Connection will automatically be
established, then Connection test will Start and
the test result will be Displayed.
7
Press [ OK ] to complete the Network
setup.
EN - 46
PIN Code Method
This method lets you configure the wireless Network
using PIN Code method.
4
Select "PIN Code Method" using
*2
.
[ K / L ], then press [ OK ].
5
Select an access Point to which you
wish to connect this unit using [ K / L ],
then press [ OK ]
• Confirm the 8-digit PIN Code Displayed On-
screen.
6
Log on to your Wireless Networks
and enter the 8-digit PIN Code in it.
• For how to log on and set up your Wireless
Networks, please refer to its Owner's Manual.
• Network Connection will automatically be
established, then Connection test will Start and
the test result will be Displayed.
7
Press [ OK ] to complete the Network
setup.
You can check the Network Status.
1
Press [ HOME ], then Select "Settings"
"General Settings"
then press [ OK ].
2
Select "Displaying Network Status",
then press [ OK ].
• List of Network information will be Displayed.
• Select "Return", then press [ OK ].
• Select "Wireless" using [ K / L ], then press
[ OK ]. List of wireless Network information will
be Displayed. Select "Address / Proxy", List of
Network information will be Displayed again.
Displaying Network Status
"Network",