Sanyo FWZH776F Owner's Manual page 21

3
Select "Register External HDD in
this device" using [ K / L ], then press
[ OK ].
• Confirmation message will appear twice. If
you agree, Select "Yes" using [ 0 / 1 ], then
press [ OK ]. Formatting will Start. Wait until
formatting is completed.
4
Select to change the External HDD
name or not.
• If you would like to change the External HDD
name, Select "Yes" using [ 0 / 1 ], then press
[ OK ]. Move on to 'Renaming External HDD' on
page 65.
• If you do not want to change the External HDD
name, Select "No" using [ 0 / 1 ], then press
[ OK ].
Unregistering an External HDD
1
Press [ HOME ], then Select "Media
Manager" "USB-HDD Menu"
"Register External HDD Setting"
using [ K / L / 0 / 1 ], then press [ OK ].
• External HDD Registration screen will appear.
2
Select an External HDD to unregister
using [ K / L ], then press [ OK ].
• Confirmation Window will appear.
3
Select "Deregister USB-HDD"HDD"
using [ K / L ], then press [ OK ].
• Confirmation Message will appear.
4
Select "Yes" using [ K / L ], then press
[ OK ].
5
Confirmation message will appear
again. Select "Yes" using [ K / L ],
then press [ OK ].
• After Unregistration is completed. Press
(EXIT) ] to Exit.
[
Note(s)
• After Deregistration of External HDD, all Recorded
Titles in the External HDD cannot be Played back.
Disclaimer Disclaimer
• We are not responsible for any damages or
injury caused by fire, natural disaster (including
earthquakes, lightning strikes, etc.), misuse, or use
under abnormal circumstances.
• We are not responsible for any indirect damages
from use of this unit or malfunction of this unit.
• We are not responsible for any damages caused by
not following the Instructions in the Owner's Manual.
• We are not responsible for any damages from system
malfunctions caused by use of an unauthorized third
party's device, Software or a combination of these.
Important Notes for the HDD and External HDD s Important Notes for the HDD and External HDD's
• This unit is equipped with an Internal HDD.
• An External HDD can be used by Connecting it to
this unit.
• HDD's are susceptible to damage from conditions,
such as impact shock, vibration, and temperature
changes. To avoid losing Stored Data, be careful to
not do the following:
– Do not vibrate or send shock waves to the HDD.
– Do not use this unit on an unstable or moving
surface.
– Place this unit on a level surface. For the External
HDD, place it as the manufacturer advises.
– Do not block the cooling vents on the bottom or
rear panel on this unit.
– Do not use this unit in places where the
temperature is extremely high or fluctuates
greatly.
– Do not unplug the AC Power cord while this unit
is On.
– Do not Unplug the AC Power cord or Turn Off
the Circuit Breaker while this unit is Recording or
Playing. Before Unplugging the AC Power cord,
first follow the procedure Protecting a Title
page 42, then Start Shutting Down the unit,
wait until this unit has Finished its Shutdown
Procedure, confirm that it is Completely Shut
Down, then Unplug the AC Power cord.
– We are not responsible for Data loss due to
impact shock, vibration, false operations,
malfunction or unauthorized repair of this unit.
• HDD's have numerous mechanical parts inside
and are highly precise and fragile, similar to PC's;
there is a possibility that a partial breakdown could
occur, resulting in Data reading / writing becoming
impossible. Therefore, the HDD should be
considered a temporary storage device until viewing
the Recorded Titles.
If a Recording is attempted on a partially-broken area
on the HDD, block-noise in the picture or distorted
sound may occur. If the HDD is continuously used
in this condition, the symptoms may become
severe, and in the End, the entire HDD may become
unusable. If such symptoms appear, please contact
the service as soon as possible for maintenance or
repair.
EN
EN - 21