Cr3D-700 Controller - Mitsubishi Electric MELFA CR800-D Series Instruction Manual

6.1.5. CR3D-700 controller

Open the door of the robot controller.
The R700CPU unit is installed in the right end. Remove one interface cover of the option slots 1-3 in
the CPU unit, and mount the CC-Link interface card there.
Please use the handle of the interface card at mounting of the interface card.
Interface card
Lever
Removal
lever
Figure 6.1-5 Mounting of the CC-Link interface card (CR3D controller)
Interface cover
Interface cover
removal lever
Connection connector
R700CPU unit
20
R700CPU unit