6.2.4. CC-Link communication cable wiring of two or more set connection
If two or more slave stations connected, prepare one more CC-Link cable connected to the
one-touch connector, and connect as shown in the following
Figure 6.2-2 The example of one-touch connector connection for two or more station connection
Terminator
Terminat
DA
DB
DG
SLD
CC-Link
master-station side
Figure 6.2-3 The example of CC-Link cable connection for two or more station connection
Shield
CC-Link
Shield
Interface card
24
DA
DB
DG
SLD
リモート I/O
Remote I/O station