Checking Connections - Mitsubishi Electric MELFA CR800-D Series Instruction Manual

6.3. Checking Connections

Check the following connections again before using the CC-Link interface card.
Table 6.3-1 Checking Connections
No.
1 Is the CC-Link interface card securely installed in slot of the controller?
2 Are the CC-Link cables between the CC-Link interface card and the external
devices you provided connected properly?
3 Are the rotary switches and DIP switches on the card set correctly?
4 Is a terminal resistor installed?
5 Is the ferrite core attached?
Check item
28
Check